When I first started driving, like most people I know IÂ set my sideview mirrors so that I could always see the side of the car. It seemed like the right thing to do. However, this leaves one with a huge blind spot, especiallyÂ just off to your back left. At the time,Â I figured you just had to turn around to properly clear yourself before changing lanes, and I didn’t understand why we even bothered to have sideview mirrors.Â Fortunately,Â not longÂ after I got my license,Â my insurance companyÂ decided to put a little set of instructions in their monthlyÂ newsletter for young driversÂ on how to properly set the mirrors. It turns out the car companies actually know what they’re doing with the whole mirror situation, it’s just that most of us don’t. Here’s how they’re supposed to work:
The problem with the way most people set up their mirrors is that they render the sideview mirrors almost completely redundent with the rearview (center) mirror by aiming them essentually straight back, so that you can see what’s pretty much straight behind you, including the side of your car, but not much to the side. But the sideview mirrors are actually supposed to cover very little: just the area between what you can see out the back with the rearview, and what you can see with your peripheral vision. With properly set mirrors you should be able to see everything without moving your head. You should be able to see a car coming from behind you in either lane in your rearview mirror, and as it leaves your rearview mirror it should be just coming into your sideview, and as it leaves your sideview mirrors it should be coming up directly beside you in your peripheral vision. You should thus be able to change lanes by moving your eyes, not your head.
Given differences in people’s cars (not to mention heads) the only way to get it perfect is to experiment, making sure that you never lose complete sight of a car passing you on either side. You can do this safely while stopped at a light as cars pulls up beside you, or you canÂ adjust them whileÂ parked on the side of a street. To get a very good first approximation,Â do the following (this is the method USAA recommends):
- Set the rearview so that you can see straight backwards.
- Stick your head up right against the driver side window, and adjust your left sideview mirrorÂ so that you can just begin to see the leftÂ side of your car.
- Put your head in the middle of the car, between the driver and front passenger’s seat and adjust your right mirror until you can just see the right side of the car.
When you are in a normal driving position, you won’t be able to see your own car in your sideview mirrors. You’ll probably find driving like this disconcerting at first because all you can see on the side mirrors is the side of the road rushing by, with no visual reference to let you know exactlyÂ where you’re looking. In fact,Â you won’t be able to see anything in your sideview mirrorsÂ that you can see in your rearview.Â But that’s the point! If they are adjusted correctly, each mirror handles a certain angle of view behind you such that everything is covered, with no blindspot big enough for a car.
When changing lanes, all you need to do is check your rearview, and then glance toÂ the appropriateÂ sideview to make sure it’s not filled with car.Â If you just see a blur of road rushing by, you’re clear. It takes a while to learn to trust it, and for me the only way I could do so was to verify several times that I never lost sight of a passing car as I was driving.
Unlike most of my posts, this isn’t just meaningless pedantry. The whole idea is that if you have your mirrors adjusted correctly, you never need to turn your headÂ around to change lanes, thus always keeping your head pointed where you’re going. Turning around to check what you might bump into while changing lanes is really a bad idea when it leaves you not looking at what you’re headed towards at 65 MPH.